The CS10n is a two-way, full-range intelligent loudspeaker, intended for use in a wide variety of applications. Utilizing Adamson’s proprietary network platform, the CS10n employs a redundant MILAN scheme with the ability to daisy-chain networked audio between multiple sources, an analog XLR input and output, as well as on-board DSP and amplification. All features of the loudspeaker are controlled and monitored through Adamson’s proprietary AI software.
Acoustically, the CS10n contains 2x 10-inch Kevlar® Neodymium transducers and a 4” compression driver. The critically optimized sound chamber produces a slightly curved wavefront with a nominal dispersion pattern of 80° x 10° (H x V). The narrower horizontal pattern allows for increased usability in reﬂective spaces as well as increased long-throw capability of a CS-Series package.
The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with a male and female XLR connector, 2x etherCON connections and an in and through powerCON TRUE1 connection.
Please refer to the CS10n User Manual for further information.
|Frequency Range (+/-3 dB)||60 Hz - 18 kHz|
|Nominal Directivity (-6 dB) H x V||80° x 10°|
|Maximum Peak SPL**||141.3 dB|
|Components LF||2x ND10-LM 10” Kevlar® Neodymium Driver|
|Components HF||Adamson NH4 4” Diaphragm / 1.5” Exit Compression Driver|
Slidelock Rigging System
|Connection||Power: powerCON TRUE1 Network: 2x etherCON Analog: 2x XLR|
|Height Front (mm / in)||265 / 10.4|
|Height Back (mm / in)||178 / 7|
|Width (mm / in)||737 / 29|
|Depth (mm / in)||526 / 20.7|
|Weight (kg / lbs)||31 / 68.4|
|Amplification||2 channel Class-D, 2400 W total output|
|Input Voltage||100 - 240 V|
|Current Draw at 230 V||0.45 A rms idle, 1.6 A rms long-term, 10 A max peak|
|Sub-Compact Support Frame (930-0020)||Support frame for CS10, S10, CS10n, S10n, CS119 & S119 enclosures|
|Extended Beam (930-0021)||Accommodates greater array articulation|
|Moving Point Extended Beam (930-0033)||Extension beam with continuously adjustable pick point|
|Line Array H-Clamp (932-0047)||Horizontal articulator clamp to be used with CS-Series/S-Series/IS-Series line array rigging frames (max load: 200 kg)|
|Extended Lifting Plates (932-0043)||Lifting plates with fine resolution pick points for single point hangs (2 per set)|
|Sub-Compact Line Array Dolly (938-0019)||Transports up to 4x CS10, S10, CS10n, S10n enclosures.|
|Dolly Stacking Legs (938-0014)||The Dolly Stacking Legs allow for your E-Series, CS10, CS10n, S10 or S10n system to be ground stacked without leaving the Dolly. As the Dolly naturally sits in a downward angle, the stacking legs allow you to elevate your stack to an angle which perfectly suits your particular application.|
|Sub-Compact Line Array Cover 4up (907-0026)||Cover for 4x CS10, S10, CS10n or S10n stacked on a Sub-Compact Line Array Dolly (part no. 938-0019)|
|Sub-Compact Line Array Flight Case (901-0003)||Road-ready Flight Case for 4x CS10, S10, CS10n or S10n. 31.25" x 25" x 50"|
|Sub-Compact Underhang Adapter Kit (931-0010)||Suspends CS10/CS10n/S10/S10n enclosures with the use of the Sub-Compact Support Frame (part no. 930-0020) from E-Series 3-way line source enclosures|